English
Home > Products > Solar PV Ribbon Production line

Solar PV Ribbon Production line

For long-term high-yield photovoltaic material production, customized Solar PV Ribbon Production line from GRM Rolling Mill provides stable and low-waste manufacturing solutions. Aiming at the industry trend of ultra-thin solar ribbons, this intelligent production line stably produces low-stress interconnect ribbons with minimum thickness of 0.05 mm, keeping workshop raw material waste close to zero.


Product Introduction

To meet strict international bidding technical standards, top China Solar PV Ribbon Production line suppliers represented by GRM provide full-automatic intelligent rolling lines. Equipped with closed-loop real-time tension controller, the line avoids copper strip stretching and performance attenuation during production. Relying on 16 years of rolling equipment R&D experience, it maintains ±0.004 mm micron-level precision at 120 m/min high speed, guaranteeing stable electrical conductivity of finished solar ribbons.

Technological Advantages

Poor tension control on standard assembly lines causes structural stretching, which alters electrical conductivity. Our Solar PV Ribbon Production line uses active tension feedback loop tracking to secure raw material properties:

• Micron-Level Stable Precision: Fixed ±0.004 mm thickness tolerance, eliminating soldering defects and cell mismatch in downstream module production.

• Energy-Saving Intelligent Control System: Custom independent PLC program reduces idle power consumption and improves overall production efficiency by 30%-40%.

• Future-Proof Expansion Interface: Reserved interfaces for online surface inspection, automatic dimension detection and digital unmanned workshop system docking.

System Technical Parameters

This automated Solar PV Ribbon Production line integrates specialized payoff stands that allow continuous spool changes without stopping the rolling process.

Equipment Station

Core Engineering Metric

Material Feeding System

Patented Polygonal Wire Automatic Feeding Device

Rolling Precision

Thickness: ±0.004 mm / Width: ±0.03 mm

Max Continuous Running Speed

120 m/min

Enterprise Qualification

National High-Tech Enterprise (GR202432002327)

Brand Authority & Global Support

We protect your capital investment in the Solar PV Ribbon Production line through robust corporate backing and extensive engineering verification:

• Top-Tier Enterprise Cooperation: Provide customized rolling production lines for new energy industry leaders such as BYD.

• Pre-Sales & After-Sales Full Protection: Free 3D process simulation before production; 48-hour global technical response and lifelong equipment maintenance consultation after delivery.

Procurement FAQ

Q: What is the lead time and testing protocol before shipping the Solar PV Ribbon Production line?

A: All production lines follow ISO standardized production management. Every complete line will pass strict FAT factory acceptance test including full-load continuous operation test before packaging. Complete test reports are provided together with seaworthy export wooden cases for customer’s customs clearance and internal equipment audit.

Related Products

Hot Products

  • CTC Continuously Transposed Conductor Line

    CTC Continuously Transposed Conductor Line

    The GRM Rolling Mill CTC Continuously Transposed Conductor Line boasts stable operation and high precision, supports speed adjustment and customized configurations, and is widely applicable to precision wire production in transformer, new energy vehicle, home appliance, medical, and aerospace electrical fields. Contact us!
  • PV Ribbon Rolling Mills

    PV Ribbon Rolling Mills

    High-quality PV Ribbon Rolling Mills from GRM Rolling Mill manufacturer are core rolling equipment specifically designed for photovoltaic (PV) busbars, suitable for producing PV interconnects, busbars, and ultra-thin copper strips for high-efficiency cells.
    1. High precision
    2. High stability
    3. Maximum line speed: 120m/min
    4. Thickness tolerance: ±0.004mm
  • Single Stand Multi-Groove Reducing Rolling Mill

    Single Stand Multi-Groove Reducing Rolling Mill

    GRM Rolling Mill offers a high-quality Single Stand Multi-Groove Reducing Rolling Mill. This equipment utilizes flexible multi-groove rolling technology, making it an ideal solution for laboratory material testing, small-batch prototyping, and multi-specification processing.
    1. Stable dimensional control
    2. Adjustable rolling speed
  • Photovoltaic Welding Strip Rolling Mill

    Photovoltaic Welding Strip Rolling Mill

    The China photovoltaic welding strip rolling mill produced by GRM Rolling Mill factory is a special flat wire product used to connect solar cells in photovoltaic modules. It is composed of copper substrate and surface coating. Copper substrate is usually high-purity oxygen free copper or T2 red copper, with copper content ≥ 99.99% and conductivity ≥ 98%. It has good conductivity and certain strength, which can ensure efficient current transmission.
  • Solar PV Round Wire Machine

    Solar PV Round Wire Machine

    GRM Rolling Mill is a leading global supplier of precision production equipment(like Solar PV Round Wire Machine) and complete line solutions for photovoltaic ribbons, particularly MBB ribbons. We specialize in providing comprehensive technology for manufacturing interconnection ribbons—the core conductive material for PV modules—covering precision drawing, timing, and intelligent winding. Our equipment is designed to achieve exceptional stability and consistency in ribbon geometry, coating uniformity, and mechanical properties, which serves as the cornerstone for enhancing cell efficiency and long-term module reliability.
  • PV Busbar Ribbon Production Line

    PV Busbar Ribbon Production Line

    GRM PV Busbar Ribbon Production Line are designed to continuously process TU1 oxygen-free copper round wire into high-precision tin-coated flat conductive ribbon. The line is suitable for PV interconnection ribbon, busbar ribbon, and reflective busbar ribbon production.
    The complete line integrates wire drawing, precision rolling, continuous annealing, flux treatment, hot-dip tin coating, and automatic take-up. It helps PV ribbon manufacturers control width and thickness accuracy, tin coating quality, strip straightness, and winding consistency.
    The GRM busbar ribbon production line is approximately 26 m long and 3 m wide, with a total line weight of about 14 tons. The design speed can reach up to 150 m/min, depending on copper wire size, finished ribbon dimensions, tinning speed, and take-up method. Under typical production conditions, the monthly output can reach approximately 60-80 tons.
  • Related Blog
  • Reviews

  • The role of Photovoltaic Welding Strip Rolling Mill in the photovoltaic industry chain

    The Photovoltaic Welding Strip Rolling Mill is a core specialized equipment in the midstream welding strip manufacturing process of the photovoltaic industry chain, located at the production source of the core conductive components of photovoltaic modules. Its technical performance and processing accuracy directly affect the quality of photovoltaic welding strips, and thus play a key role in the power generation efficiency, reliability, and service life of downstream photovoltaic modules. Its specific value runs through multiple links of the industry chain:

  • Why Is a Strip Rolling Mill Essential for Modern Metal Processing?

    A Strip Rolling Mill is a vital machinery system used in the metal processing industry to reduce the thickness of metal strips while enhancing their mechanical properties. At Jiangsu Goodroller Machinery Co., Ltd., we specialize in designing and manufacturing high-performance Strip Rolling Mills to meet the diverse needs of our global customers. I have witnessed how this equipment transforms raw metal into valuable materials for industries such as automotive, construction, and electrical components.

  • What Makes a Flat Wire Rolling Mill the Right Choice for Precision Conductors?

    A Flat Wire Rolling Mill turns round wire or strip into consistent, high-precision flat wire used in motors, transformers, coils, and advanced electrification projects.

  • What Are Coil Pay-Off Systems and How Do They Benefit Manufacturing Processes

    In this comprehensive blog post, we explore Coil Pay-Off Systems, their importance in the manufacturing process, and how they enhance production efficiency. We will discuss the components of these systems, their applications, and the key factors to consider when selecting the right system for your operations. Whether you're involved in metalworking, rolling mills, or wire production, this blog will provide you with valuable insights into Coil Pay-Off Systems.

  • What is the working principle of PV Ribbon Rolling Mills

    The PV Ribbon Rolling Mills belongs to the cold precision two roll/four roll reversible continuous rolling mill, which specializes in cold rolling oxygen free copper round rods and coarse copper flat billets into ultra-thin photovoltaic interconnect strips and converging copper strips. The core relies on the principle of metal cold plastic deformation, combined with constant tension closed-loop control to achieve micrometer level ultra-thin precision molding.

  • How Can a Profile Rolling Machine Transform Metal Forming Efficiency and Product Quality

    In today's highly competitive metal processing industry, manufacturers are constantly seeking advanced equipment that can improve productivity, precision, and cost efficiency. As a leading provider of rolling mill solutions, GRM delivers innovative technologies designed to meet modern manufacturing demands.

Send Inquiry

X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
Reject Accept